RSS

Friday, February 5, 2010

How HDTV Works? - DTV vs. HDTV

DTV vs. HDTV

The Advanced Television Standards Committee (ATSC) has set voluntary standards for digital television. These standards include how sound and video are encoded and transmitted. They also provide guidelines for different levels of quality. All of the digital standards are better in quality than analog signals. HDTV standards are the top tier of all the digital signals.
Aspect ratios: Standard vs. high-definition
Standard vs. high-definition aspect ratio

The ATSC has created 18 commonly used digital broadcast formats for video. The lowest quality digital format is about the same as the highest quality an analog TV can display. The 18 formats cover differences in:
  • Aspect ratio - Standard television has a 4:3 aspect ratio -- it is four units wide by three units high. HDTV has a 16:9 aspect ratio, more like a movie screen.
  • Resolution - The lowest standard resolution (SDTV) will be about the same as analog TV and will go up to 704 x 480 pixels. The highest HDTV resolution is 1920 x 1080 pixels. HDTV can display about ten times as many pixels as an analog TV set.
  • Frame rate - A set's frame rate describes how many times it creates a complete picture on the screen every second. DTV frame rates usually end in "i" or "p" to denote whether they are interlaced or progressive. DTV frame rates range from 24p (24 frames per second, progressive) to 60p (60 frames per second, progressive).
Many of these standards have exactly the same aspect ratio and resolution -- their frame rates differentiate them from one another. When you hear someone mention a "1080i" HDTV set, they're talking about one that has a native resolution of 1920 x 1080 pixels and can display 60 frames per second, interlaced.
The 18 primary DTV standards
The 18 Primary DTV Standards

Broadcasters get to decide which of these formats they will use and whether they will broadcast in high definition -- many are already using digital and high-definition signals. Electronics manufacturers get to decide which aspect ratios and resolutions their TVs will use. Consumers get to decide which resolutions are most important to them and buy their new equipment based on that.
MPEG-2
DTV usually uses MPEG-2 encoding, the industry standard for most DVDs, to compress the signal to a reasonable size. MPEG-2 compression reduces the size of the data by a factor of about 55:1, and it discards a lot of the visual information the human eye would not notice was missing.
­Until the analog shutoff date, broadcasters will have two available channels to send their signal -- a channel for analog, and a "virtual" channel for digital. Right now, people can watch an over-the-air digital signal only if they are tuned in to the broadcaster's virtual digital channel. After analog broadcasting ends, the only signals people will receive over the air will be digital.
However, even though a digital signal is better quality than an analog signal, it isn't necessarily high definition. HDTV is simply the highest of all the DTV standards. But whether you see a high-definition picture and hear the accompanying Dolby Digital® sound depends on two things. First, the station has to be broadcasting a high-definition signal. Second, you have to have the right equipment to receive and view it. We'll look at how to get an HDTV set and signal next.

via: http://electronics.howstuffworks.com/hdtv2.htm

No comments:

Post a Comment

LED HDTV Carousel - My Pick